Please note that JavaScript and style sheet are used in this website,
Due to unadaptability of the style sheet with the browser used in your computer, pages may not look as original.
Even in such a case, however, the contents can be used safely.

  1. Home
  2. News
  3. Product Knowledge
  4. Calibration Service news Product Knowledge Antistatic wrist strap

Calibration Service news Product Knowledge Antistatic wrist strap

Activities

Antistatic wrist strap

An antistatic wrist strap, ESD wrist strap, or ground bracelet is an antistatic device used to prevent electrostatic discharge (ESD) by safely grounding a person working on electronic equipment. It consists of a stretchy band of fabric with fine conductive fibers woven into it. The fibers are usually made of carbon or carbon-filled rubber, and the strap is bound with a stainless steel clasp or plate. They are usually used in conjunction with an anti-static mat on the workbench, or a special static-dissipating plastic laminate on the workbench surface.

An antistatic wrist strap with crocodile clip.The wrist strap is connected to ground through a coiled retractable cable and 1 megaohm resistor, which allows high-voltage charges to leak through but prevents a shock hazard when working with low-voltage parts. Where higher voltages are present, extra resistance (0.75 megaohm per 250V) is added in the path to ground to protect the wearer from excessive currents; this typically takes the form of a 4 megohm resistor in the coiled cable (or, more usually, a 2 megohm resistor at each end). Very cheap wrist straps do not have conductive fabric and instead use the fabric to hold the metal plate against the skin, which can result in reduced ESD protection over time as the metal corrodes.

Wrist straps in industry usually connect to Earth Bonding Points (part of the grounding system) via either a 4 mm plug or 10 mm press stud, whereas personally owned straps are likely to be connected to ground via a crocodile clip.

In addition to wrist straps, ankle and heel straps are used in industry to bleed away accumulated charge from a body. These devices are usually not tethered to earth ground, but instead incorporate high resistance in their construction, and work by dissipating electrical charge to special floor tiles. Such straps are used when workers need to be mobile in a work area and a grounding cable would get in the way, such as in an operating theatre.

Credit : http://en.wikipedia.org/wiki/Antistatic_wrist_strap